De-sta-co F5-B AC Inverter Drive Manuel d'utilisateur télécharger pdf (Page 44)

Adjustment of the Drive

The positioning function enables the approach of a position with a signal

from different frequencies. With parameter CP.27 the stop position can

be adjusted, which entails an additional constant running time. CP. 27

selects positioning on/off and if positioning is on and additional run time.

This additional run time is added to every speed. In the example below

CP.27 is set to 0.00. This selects posiitioning without a positioning delay.

Positioning Delay

Factory setting CP.22: 27

Note: Enter-Parameter

Relay output 2

Switching level

This parameter determines the switching point for relay output 2. Since the

operator display can only view 5 characters, the last digits are not

displayed for the higher values. Note; all conditions chosen with CP.22

don't require use of CP.23.

Adjustment range: -30000.00...30000.00

Resolution: 0.01

Factory setting: 0.00

Start

(pin 14)

Stop

(pin 11)

Stop From

Max Speed

Speed 1

(MAX)

Speed 2

Stop From

Low Speed -

No Positioning

Speed 1

(MAX)

Speed 2

Stop From

Low Speed -

Positioning

Speed 1

(MAX)

Speed 2

0 Hz

Additional run

time so that the

stop point is the

same as the

stop from the

max speed.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

De-sta-co F5-B AC Inverter Drive Manuel d'utilisateur Page 44

Commentaires sur ces manuels